Part Number: 04-006
Our U-500 is recommended for high-volume production facilities that require the primary use of a single sized V-Nail for frame joining. The U-500 has the same user-friendly, touch screen interface as our U-600 Underpinner. The only difference between the two models being the U-500 has single channel capacity compared to a multi-channel with the U-600 unit.
With data storage of 5,000 different frame profiles, the operator can easily recall any frame profile alphabetically, numerically or by using the bar code reading option.
Handles frame joining requirements commonly found in picture framing, woodworking (Door Trim), canvas stretcher bar and mirror frame joining.
Former Model Reference - VN4MP
|U-500 Purchase Package|
|(1)||7MM Nail Head|
|(1)||10MM Nail Head|
|(1)||12MM Nail Head|
|(1)||Single Vertical Positive Placement Clamp|
|(1)||Single Metal Pressure Plate|
|(1)||Double Metal Pressure Plate|
|(2)||Blue Rubber Pads (SW)|
|(2)||Yellow Rubber Pads (MW)|
|(2)||Black Rubber Pads (HW)|
|(1)||C.A.P.S Operating Software|
|(1)||3 Stage Air Pressure Filter Regulator|
|(1)||Adjustable Fence - 3 knobs|
|(1)||Front Horizontal Clamp|
|(1)||4mm Allen wrench|
|(1)||5mm Allen wrench|
|(1)||6mm Allen wrench|
|(1)||8mm Allen wrench|
|(1)||Touch screen PC Panel|
|(1)||Magnetic V-Nail pick up tool|
|(4)||Machine base levelers|
|(1)||Fence template 4-6-8 side|
AMP's Computerized Air Pressure System (C.A.P.S.) is the latest operating feature for its U-600 Production Underpinner solutions offering the following benefits to any production based joining operation.
This new system provides the following production features...
Maximizes production efficiently with pre-set clamping pressures
Eliminates moulding material damage by controlled vertical clamping pressure
To utilize this new feature, the operator stores in the air pressure values needed depending on the moulding hardness for each of the frame profiles stored in memory. By setting a pressure setting into the memory database, programs recalled through the key pad or barcode scanning option automatically sets the clamping air pressure needed.
All new equipment purchases for U-500 now include the C.A.P.S feature.
|04-024||Black Rubber Pad (HW)|
|04-025||Yellow Rubber Pad (MW)|
|04-026||Blue Rubber Pad (SW)|
|04-090||Nail Head - 3mm|
|04-095||Nail Head - 5mm|
|04-091||Nail Head - 7mm|
|04-092||Nail Head - 10mm|
|04-093||Nail Head - 12mm|
|04-094||Nail Head - 15mm|
|04-032||Extension Wings Kit|
|04-167||Magnetic Base for Vertical Clamp Assembly|
|04-020||Single Metal Pressure Plate|
|04-022||Double Metal Pressure Plate|
|04-023||Magnetic - Single Metal Pressure Plate|
|41-221||Single Vertical Placement Clamp Kit|
|41-142||Double Hydraulic clamping Mechanism|
115/220 Volt 50/60 Hz.
Compressed Air 4NI at 5 Bar
(min to max)
(min to max)
|¼” up to 4 ½”
|¼” up to 3 ¼”
|V-Nail Sizes||V-Nail Channel
|Multiple||5, 7,10,12,15 mm
|Weight:||309 lbs (140kg)|